One module, many tools
Ornaments & Crime is a whole toolbox in one small module: quantizers with editable scales, chord and Tonnetz-based harmony generators, envelope and LFO generators, strange-attractor modulation, step sequencers, byte-beat generators and tuning references. With the Phazerville firmware it adds the Quadrants and Hemisphere applets, so you can run several small tools side by side.
Quick hands-on control
The hOC has four channels, each with a CV input, a trigger input and a CV output. Attenuators on the input side set how much of each incoming voltage reaches the module, and LEDs on the outputs show how much of the computed voltage is really there. The apps have deep menus, but the main moves happen right on the front panel: the knobs give fast results, the encoders fine-tune, and the output range is set by hand, so a modulation only goes as far as your patch needs.
Patch ideas
Animate a filter. Run an LFO and limit its range at the panel, so it sweeps the cutoff only where it sounds good.
Shape an envelope. Send a trigger in and get an ASR envelope out. Set it roughly with the knobs, fine-tune it with the encoders, and limit its intensity.
Quantize and reuse. Feed the dual quantizer with an LFO for melodies, and send an attenuated copy of the pitch to a filter so the tone follows the notes.
Firmware
This is a hardware platform we provide and adapt to 200 series levels. You can compile your own software for it, or choose one of our suggestions, such as the Phazerville suite. Please be aware that we do not develop the software or provide service for it.
At a glance
| Platform | Ornaments & Crime |
|---|---|
| Channels | 4 × CV input, trigger input and CV output |
| Panel | Input attenuators, output level LEDs, 2 encoders, OLED display |
| Levels | Adapted to 200 series voltages |
| Trim | Trim ports for incoming and outgoing voltages |
| Firmware | Phazerville, mxmxmx, or your own |
| Mounting | h series, needs an h bracket in a 1U space |
Downloads
Phazerville firmware mxmxmx firmware

