Channels
Eight channels carry continuous control voltages from 0 to 12 V, and eight channels carry gates at 10 V or 14 V. Clock and START/stop are inputs on the MK1 version and outputs on the MK2 version.
MK1 and MK2
Both OXI ONE versions work. Depending on the one you use, clock and reset run as inputs or as outputs. The MK switch acts as a clock mute and reset breaker.
Made for the OXI ONE
The OXI ONE is a standalone sequencer with multitrack, chord, polyphonic, monophonic and stochastic modes, and eight CV and eight gate outputs at Eurorack levels. The hOP lifts all of them to 4U levels in one go: eight continuous voltages up to 12 V and eight gates at 10 V or 14 V, ready for pitch, modulation and envelopes in your system.
Patch ideas
Four voices at once. Use four CV/gate pairs to play four voices, each from its own OXI ONE track.
Chords and modulation. Play chords from the OXI ONE’s chord mode on several oscillators, and route its modulation lanes to filters and VCAs through the remaining channels.
At a glance
| Channels | 18 in total |
|---|---|
| CV | 8 × 0–12 V, continuous |
| Gates | 8 × 10 V or 14 V |
| Clock and START/stop | Inputs on MK1, outputs on MK2 |
| Precision | 0.05 V |
| Indicators | A low-noise LED on every signal |
| Mounting | h series, needs an h bracket in a 1U space |
| OXI ONE version | MK1 or mK2, choose above the cart |



