Filters
Serial and parallel operation give you tons of combinations. Buffered 8-position rotary switches let you build anything from a super strong 7-pole low-pass filter to gentle notch and phase combinations.
Version 2
V2 adds level LEDs for both channels and a new gain stage that lowers the outgoing volume and adds some overdrive grit. The video still shows the first version.
Good to know
Switching filters while audio runs through them can cause clicks, because the filter stages have different DC offsets.
Pole mixing
A classic multimode filter of that era is a chain of four filter stages, each taking away a little more of the top end. Pole mixing taps the stages and combines them in different amounts, which gives far more than plain low-pass: band-pass, high-pass, notch and phase responses all come from the same core. The hPF2 offers 15 of these combinations on each channel.
Patch ideas
A strong low-pass. Run both filters in series as low-pass for a very steep slope, up to 7 poles in total.
Two colours at once. Run the channels in parallel with different modes, for example a notch on one and a band-pass on the other, and blend them.
Grit on demand. Use the V2 gain stage to push the output into overdrive, or to bring the level down after a resonant setting.
At a glance
| Filters | 2, with 15 different pole filters |
|---|---|
| Routing | Serial or parallel |
| Selection | Buffered 8-position rotary switches |
| Steepest | 7-pole low-pass |
| V2 | Level LEDs, output gain stage with overdrive |
| Mounting | h series, needs an h bracket in a 1U space |





