A map of rhythms
At the heart of the hTM is a map of drum patterns, learned from a large collection of electronic music tracks and drum loops. Every spot on the map is a rhythm, and moving across it morphs smoothly from one groove into the next, so you steer through beats instead of programming them step by step.
From backbone to frenzy
Each of the three channels, typically kick, snare and hi-hat, has its own density. Low settings strip a pattern down to its backbone, or mute the channel; higher settings add notes until the pattern is completely filled. New notes always fall where the groove expects them, so even a dense pattern still sounds like a beat. A dose of randomness adds rolls and ghost notes, so the pattern never repeats exactly. With intensity and variation under voltage control, the rhythm can build up and break down with the rest of your patch.
On the panel
MAP X and MAP Y choose the spot on the map, CHAOS sets the amount of randomness, and three FILL knobs set the density of each channel. The trigger outputs play the three parts, and the white bananas are the accent outputs: they mark the strong, structurally important steps, perfect for louder hits or opening a filter. Clock and sync connect through the orange bananas.
Euclidean mode
Switch modes and the hTM becomes a three-channel Euclidean sequencer: each channel gets its own cycle length and number of hits, spread as evenly as possible, and the accent outputs fire on the first step of each cycle. Different lengths per channel drift against each other into long, evolving polyrhythms.
MIDI sync
Best of all, it has MIDI sync and reset, so your 4U rack follows your outboard rig. It also converts MIDI clock into a 1/1 or 1/16 pulse to sync the rest of your system.
At a glance
| Based on | Mutable Instruments Grids |
|---|---|
| Channels | 3 trigger outputs plus accent outputs (white bananas) |
| Controls | MAP X, MAP Y, CHAOS, 3 × FILL |
| Modes | Pattern map or Euclidean |
| Clock | Clock and sync on the orange bananas |
| CV | Intensity and variation |
| Sync | MIDI clock and reset; 1/1 or 1/16 pulse out |
| Mounting | h series, needs an h bracket in a 1U space |



